manualshive.com logo in svg

Johnson Controls IQ Panel 4, Installation Manual, Page: 88 / 178

Share
Download
Johnson Controls IQ Panel 4 Installation Manual Download Page 88

Panel Motion Settings 

Control settings for the built-in Panel Motion Detector.  Change the sensitivity 
threshold and mask off up to 4 customizable areas to prevent false triggers. 

QOLSYS CONFIDENTIAL AND PROPRIETARY 

PAGE   OF 

88

178

SECURITY SENSORS

FIND IT

PANEL MOTION SETTINGS

Swipe down 
for access 

INSTALLATION

SETTINGS

ADVANCED SETTINGS

ENTER CODE (1111, 2222)

DEVICES

Masking: 

Touching “ADD MASK” will give a drawable 
area (green) that is not taken in to account 
for motion pixelation change, then touch 
“SAVE MASK” to save.  Up to 4 
independent mask areas can be drawn. 

PANEL MOTION SETTINGS

Sensitivity Setting: 

Touch “SETTING” to change the the Panel 
Motion sensitivity between Low (default), 
Medium and High.  Use the Green to Red 
bar on the right side of the screen to 
determine trigger threshold.

SECURITY SENSORS

Summary of Contents for IQ Panel 4



















































































































































































Reviews:

No comments