manualshive.com logo in svg

Johnson Controls IQ Panel 4, Installation Manual, Page: 170 / 178

Share
Download
Johnson Controls IQ Panel 4 Installation Manual Download Page 170

LEGAL

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures: 

—Reorient or relocate the receiving antenna.

 

 

—Increase the separation between the equipment and receiver.

 

 

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

 

—Consult the dealer or an experienced radio/TV technician for help. 

QOLSYS CONFIDENTIAL AND PROPRIETARY 

PAGE 

 OF 

170

178

FCC & ISED CANADA COMPLIANCE STATEMENT continued…

Summary of Contents for IQ Panel 4



















































































































































































Reviews:

No comments