manualshive.com logo in svg

Johnson Controls IQ Panel 4, Installation Manual, Page: 31 / 178

Share
Download
Johnson Controls IQ Panel 4 Installation Manual Download Page 31

INSTALLER/DEALER SETTINGS 

Setting

Default

Description

Loss of Supervisory Signals for Z-
Wave

4

Select the length in hours (4, 24) before reporting a loss of supervision on Z-Wave Sirens.

Loss of Supervisory Signals for Non 
Emergency Sensors

24

Select the length in hours (4, 12, 24) before reporting a loss of supervision on security 
devices. 

NOTE:

 For UL/cUL Resi Fire and UL Commercial Burg (UL2610) the wireless supervision window for Non-Emergency 

sensors (all intrusion sensors) shall be set to 4h

Loss of Supervisory Signals for 
PowerG Non Emergency Sensors

24

Select the length of time (20, 30 min, 1, 2, 4, 12, 18 hours) before reporting a loss of 
supervision on PowerG security devices. 

NOTE:

 For UL/cUL Resi Fire and UL Commercial Burg (UL2610) the wireless supervision window for Non-Emergency 

sensors (all intrusion sensors) shall be set to 2h

Loss of Cell Signal Timeout

30

Select the length in minutes (10-120) before reporting a loss in cellular signal. 

NOTE:

 For UL Commercial Burg (UL2610) the cell supervision is hardcoded to 200s

Communication Test

Monthly

Choose Never, Daily, Weekly or Monthly when enabling the communication test.        

NOTE:

 For UL Resi Fire (UL985) the test frequency shall be set to Weekly.  By default the system will be set to Weekly if 

UL985 is selected on Alarm.com

Communication Test Start Time

Randomized

Select the time of day that the panel will send its Communication Test.  If no time is 
selected the time will automatically be randomized.

QOLSYS CONFIDENTIAL AND PROPRIETARY 

PAGE   OF 

31

178

PROGRAMMING

Summary of Contents for IQ Panel 4



















































































































































































Reviews:

No comments