manualshive.com logo in svg

Johnson Controls IQ Panel 4, Installation Manual, Page: 38 / 178

Share
Download
Johnson Controls IQ Panel 4 Installation Manual Download Page 38

Setting

Default

Description

Zigbee Network Type

Home 

Automation and 

Security

Choose which type of Zigbee network you’d like to use.  Options are Home Automation 
and Security or Smart Energy.  

NOTE:

 This setting only appears when a Zigbee daughter card is installed in 

the Panel.

Delete All Sensors

Deletes all security sensors and Bluetooth devices programmed in the panel

Delete All Z-Wave Devices

Performs a factory reset on the Z-Wave controller.  Does not factory reset previously included devices.

Zigbee Reset

Deletes all Zigbee sensors and resets the Zigbee Network

Master Reset*

Restores panel to factory settings and erases all content

Data Recycle

This feature erases all User data previously stored.  (Wi-Fi SSID & Password, User Codes, Panel Camera 
Images, Custom Photo Frame Images, Message Center & Panel Event History).

IQ Remote Reset Authentication

Disabled

If Enabled, the IQ Remote will require authentication (Dealer or Installer Code) to master 
reset it.

QOLSYS CONFIDENTIAL AND PROPRIETARY 

PAGE   OF 

38

178

INSTALLER/DEALER SETTINGS 

PROGRAMMING

Summary of Contents for IQ Panel 4



















































































































































































Reviews:

No comments