manualshive.com logo in svg

Johnson Controls IQ Panel 4, Installation Manual, Page: 42 / 178

Share
Download
Johnson Controls IQ Panel 4 Installation Manual Download Page 42

SIREN AND ALARMS

Setting

Default

Description

PowerG Smoke Detector Siren

Fire Alarms Only

When set to “Fire Alarms Only”, PowerG Smoke Detectors that are learned into the 
system will only sound during fire alarm events.  When set to “All Alarms”, PowerG Smoke 
Detectors will act as additional wireless sirens and will sound during all alarm events.

Police Panic

Enabled

Allows Police Panic to be enabled or disabled.

Fire Panic

Enabled

Allows Fire Panic to be enabled or disabled.

Auxiliary Panic

Enabled

Allows Auxiliary Panic to be enabled or disabled.

Audible Siren for Wireless 
Supervisory Failures

Disabled

When this setting is enabled and the system is armed, supervisory failures for non-
emergency sensors are treated the same as a tamper and cause an alarm to be generated.

Allow Master Code To Access Siren 
and Alarms

Disabled

Allow the master code to access these features and settings.  

NOTE

: not allowed for UL/cUL.

QOLSYS CONFIDENTIAL AND PROPRIETARY 

PAGE   OF 

42

178

PROGRAMMING

Summary of Contents for IQ Panel 4



















































































































































































Reviews:

No comments