Johnson Controls IQ Panel 4, Installation Manual, Page: 149 / 178

MAINTENANCE
Most updates are downloaded over Wi-Fi, but in the event that Wi-Fi is not present at the
installation site, a Panel can be updated with files transferred from a local device (phone,
tablet, computer, etc) via the built-in Panel Access Point.
To perform a software update using the Panel Access Point follow the steps below:
1- Download the needed software update files from the Dealer Portal to your device (phone,
tablet, computer).
2- Turn on the Panel AP and connect your device to the network it broadcasts.
3- Go to Settings/Advanced
Settings/Upgrade Software then
touch “Upgrade Using Access Point”.
4- Press “Start” to begin the local
server session, then from your device,
navigate to the “https” site shown on
the Panel screen.
5- Follow the prompts on your device
screen to select the correct files and
transfer them to the Panel.
Swipe down
for access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)
UPGRADE SOFTWARE USING ACCESS POINT FIND IT
UPGRADE SOFTWARE
NOTE: For UL/cUL the remote
software feature shall not be
used and the panel shall not be
setup to remotely upgrade.