manualshive.com logo in svg

Johnson Controls IQ Panel 4, Installation Manual, Page: 40 / 178

Share
Download
Johnson Controls IQ Panel 4 Installation Manual Download Page 40

Setting

Default

Description

Panel Sirens

All Sirens 

On

All Sirens Off:

 This will disable the siren for all alarm types, except 

for life safety devices, including any hardwire or wireless external 
sirens. 

All Sirens On: 

 This is the default setting which enables the siren 

for all alarms 

Installer/Test Mode: 

This disables the siren for all alarm types 

including any paired or hardwired external sirens for 30 mins then 
all sirens are re-enabled

Siren Annunciation

Disabled

Panel siren pauses periodically to announce which locations have 
triggered the alarm.                                                                                       

NOTE:

 for UL/cUL this feature is not allowed for Fire, CO, Burglar Alarm

Fire Verification

Disabled

When enabled, panel requires two fire events from smoke 
detector (one detector twice or two detectors once each) 

NOTE:

 Not allowed on UL/cUL installations

SIREN AND ALARMS

FIND IT

SIREN AND ALARMS

Siren and Alarms 

Change siren and alarm settings for certain types of alarm events.

QOLSYS CONFIDENTIAL AND PROPRIETARY 

PAGE   OF 

40

178

Swipe down 
for access 

INSTALLATION

SETTINGS

ADVANCED SETTINGS

ENTER CODE (1111, 2222)

PROGRAMMING

Summary of Contents for IQ Panel 4



















































































































































































Reviews:

No comments