Johnson Controls IQ Panel 4, Installation Manual, Page: 34 / 178

Setting Default Description
Wellness Support Disabled
When Enabled, Auxiliary Pendants learned into Group 6 behave like a traditional PERS
pendant. The system generates a signal to Alarm.com but does not generate a loud local
alarm that needs to be disarmed between button presses.
NOTE: This feature can not be enabled if
Partitions are enabled.
WI-FI Warning Messages Enabled
When enabled the panel will display a pop up when entering “Settings” letting the end
user know that Wi-Fi has been disconnected.
Partitions Disabled
Create up to 4 partitions by enabling this feature.
NOTE: This setting will automatically be greyed out
and unavailable when EN Grade 2 is Enabled.
Other Automation Disabled
When Enabled, the Panel can support Zigbee Automation devices as well as Deako
Lighting integrations. These devices are added through the “Other Automation” icon that
will appear under the “Devices” icon.
NOTE: Zigbee integration requires that a Zigbee daughter card be installed in the panel.
PowerG Camera Alarm Image
Upload Count
10
Determines the number of Images to be uploaded by any PowerG PIR CAM when
triggered during an Alarm. Choose between 10 and 1.
Security Page Enabled
Choose whether or not you want the “Security Page” to appear as part of primary user
interface on the panel.
NOTE: Before the Security Page can be disabled, you must enable the “Wellness Page”
or the “Home Control Page”. This feature can not be disabled if Partitions are enabled.
Wellness Page Disabled
Choose whether or not you want the “Wellness Page” to appear as part of primary user
interface on the panel.
NOTE: This feature can not be enabled if Partitions are enabled.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 34 178
INSTALLER/DEALER SETTINGS
PROGRAMMING