manualshive.com logo in svg

Johnson Controls IQ Panel 4, Installation Manual, Page: 4 / 178

Share
Download
Johnson Controls IQ Panel 4 Installation Manual Download Page 4

PANEL  

OVERVIEW

Warning: This Product should be installed in accordance with the National Fire Alarm Code, ANSI/NFPA 72, (National Fire Protection Association, 
Batterymarch Park,Quincy, MA 02269) and with National Electric Code, ANSI/NFPA 70. Printed information describing proper installation, operation, 
testing, maintenance, evacuation planning, and repair service is to be provided with this Product. In Canada the product shall be installed in accordance with 
the Standard for the Installation of Residential Fire Warning Systems, CAN/ULC-S540.  

Warning: For Canadian installations this Product and all sensors associated with it (collectively, the “System”) should be tested once a week. The test shall be 
performed also with primary DC power de-energized. For recommended smoke detectors maintenance instructions refer to user manual associated with 
compatible Qolsys model QS5110-840 and PowerG model PG9936 smoke detectors. 

Summary of Contents for IQ Panel 4



















































































































































































Reviews:

No comments