Johnson & Johnson ETHICON ENDO-SURGERY HARMONIC 300, Service Manual

Page: 42 / 80

40 GEN04
Service Manual
Software Version 1.09 Enhanced Display Functionality
Software version 1.09 adds some enhancements to the displayed information over previous versions of
software (Fig.11-1):
• Momentarily Displays Hand Piece usage during Power-up (normal mode);
65530 - displayed number = APPROXIMATELY the number of procedures that have been performed
with the current (connected) hand piece.
• Provides an enhanced Generator / Hand Piece errors display mode:
How to enter: Power up generator and firmly press the Standby and “MIN Power-up” buttons
simultaneously until enhanced error mode display appears.
The error code information related to specific technical issues is identical to the Hex code display, but with
these added enhancements for each error code:
• Error Code Time Stamp
• Error Code Text Description
• If hand piece related, the Lot Number and Transducer Number of the hand piece that was being
used is displayed.
Caution : Make sure to press BOTH buttons simultaneously, otherwise Generator “Error code #1”
will show up (which will require to power the generator down and then back .
• Errors stored in generator memory will be displayed, most recent error first.
• Pressing the “hand-activation button while in enhanced error display mode will cause the errors stored in the
hand piece memory to be displayed (hand piece must be connector to generator).
Estimating Hand Piece Usage
Power-up state
(after dark display)
N = 65530 - 65525 = 5
procedures
Fig. 11-1 Software Version 1.09 Display