Johnson & Johnson ETHICON ENDO-SURGERY HARMONIC 300, Service Manual

Page: 78 / 80

76 GEN04
Service Manual
Parts List
The reference numbers below correspond to reference numbers on the Main Assembly Drawing on the previous page.
Reference No. Part No. Description
1 D06358P01 Fuse Label
2 D06363P01 Back Panel Label
3 3583.036 Bezel Sub-Assembly
4 3583.180 Cover Enclosure
5 3583.053 Cable Assembly, Hand Piece Receptacle
6 3583.060 Cable Assembly, Earth Terminal – Chassis
7 3583.061 Cable Assembly, Power Entry – Chassis
8 3583.062 Cable Assembly, Fuse Holder – AC Switch
9 3583.064 Cable Assembly, Volume Control – Generator Board
10 3583.065 Cable Assembly, Fan with Cable Assembly
11 3583.066 Cable Assembly, Speaker with Cable Assembly
12 3583.067 Cable Assembly, Power Supply – Generator Board
13 3583.070 Cable Assembly, Power Entry – Fuse Holder
14 3583.073 Cable Assembly, Foot Switch - Generator Board
15 3583.079 LCD Display PCB
16 3583.112 Wire Assembly, AC Switch – Power Supply
17 900-000526 Power Cord, 13 Amps, 125 Volts, 15 feet
18 3583.125 Label, Tamper Evident
19 600-000234 Power-on Rocker Switch
20 620-000243 Fuse 3.15 Amps, 250 Volts, Slo-Blo
21 640-000268 Ferrite Clamp/Bracket 279 @100MHz
22 700-001493 Hardware, Nut 8-32 (for fan assembly)
23 700-000394-2 Hardware, Phillips 8 – 32 x 5/16
(for ground to chassis)
24 700-000504-1 Hardware, Phillips 4 – 40 x 3/8
25 700-000884 Hardware, KNut 4-40
26 700-001497 Hardware, Ground Pin
27 700-001653 Hardware, Knob
28 700-001662 Hardware, Feet, Rubber Black, with screw
29 700-001663 Hardware, Fuseholder, 5 x 20 PNL MNT
30 953-45A067 Hardware, Phillips 8 – 32 x 5/16
31 700-001665 Hardware, Phillips 8 – 32 x 1-1/4 (for fan assembly)
32 700-001666 Hardware, Lockwasher, for Hand Piece
33 700-001667 Hardware, Grommet
34 700-001668 Hardware, Bushing (Wire Protectors)
35 700-001749 Hardware, Phillips 6 – 32 x 5/16
36 700-001767 Hardware, Hnut 3/4 – 16 x 7, 8 x 5/32
37 800-003007 Power Entry Module
38 875-000358 Power Supply, 48 Volt
39 950-000443 Packaging, Bag, Anti-Static 24 x 30; Pink
40 950-000530 Packaging, End Caps
41 950-000531 Packaging Carton, 18 x 19
42 700-000250 Hardware, Phillips 8 – 32 x 1/2, Secure Main Board
43 900-000266 Tystrap
44 3583.047 Generator PCB, Main
45 3583.042 Chassis Sub-Assembly
46 997-W13 Cordet Pack
47 N/A Power Supply Fuse, 5 Amp, 250 Volt
Note: Refer to Chapter 14 – System Specifications for torque requirements.