Johnson & Johnson ETHICON ENDO-SURGERY HARMONIC 300, Service Manual

Page: 5 / 80

3
GEN04
Introduction
Scope
This manual and the equipment it describes are for use only by qualified Biomedical Service Personnel. It is
intended only as a guide for technical maintenance of the H
ARMONIC
™ Generator 300 System.
This manual is intended to be a companion to the H
ARMONIC
™ Generator 300 System Operator’s Manual. A
thorough understanding of the Operator’s Manual is required to properly understand and use the information
in this service manual.
Installation Guidelines
The person installing the device shall ensure that the installation, inspection, and any required testing are
performed in accordance with the instructions in this and the H
ARMONIC
™ Generator 300 System Operator’s
Manual. The inspection shall be documented along with any test results to demonstrate proper installation.
Ethicon Endo-Surgery reserves the right to change the electrical/electronic or mechanical configurations and
components without notice. Schematic revisions may not match PCB revisions in the unit being
maintained; consult Ethicon Endo-Surgery before making any changes. When necessary, amendments to this
manual will be made available by request only.
Product Information
Product Name: H
ARMONIC
™ Generator 300 System (formerly known as U
LTRA
C
ISION
® H
ARMONIC
S
CALPEL
®
Generator 300 System)
Model Number/Product Code: GEN300/GEN04
Voltage: 100 – 240 VAC
This manual is subject to revision. When referring to this manual please include the following:
Document Type:
Service Manual
Document Number: P40401P0X (on back cover of manual)
Manufactured by:
Ethicon Endo-Surgery, LLC
Guaynabo, Puerto Rico 00969 USA
1-800-USE-ENDO (U.S.Customers)
http://www.harmonicscalpel.com
Service
1-800-USE-ENDO (U.S. Customers)
Customers outside the U.S. should contact their Ethicon Endo-Surgery representative for assistance.