John Bean B 200, Operator'S Manual

Page: 66 / 128

66
5-29
5-31
75g.
B
55g.
A
Operation
5.10.2 Hidden weights placement
How to fi t adhesive weights on the left side
of the rim disc
—
Clean the fi tting position before attaching the
adhesive weights.
—
Fit adhesive weights on the left side of the rim
disc as described in Chapter 5.8.
Applying hidden adhesive weights
The measured values and the positioning arrows for
the two correction positions behind the spokes ( Figure
5-29
) are given on the right of the Indications Field.
—
Turn the wheel to move one of the split
imbalances, on the right side ( A,Figure 5-31 )
into the compensation position (green arrows),
then lock the wheel with the brake pedal.
—
Clean the application point before attaching the
adhesive weight.
—
Apply the balance weight at the point indicated
(in the example 5 grams, A,Figure 5-31 ).
—
Turn the wheel to reach the remaining split right
side weights compensation position, then lock
the wheel with the brake pedal.
—
Having cleaned the area affected, apply behind
the second spoke the weight of the value
indicated
(in the example 45 grams, B,Figure 5-31 ).
Note
:
Applying split weights does not involve priorities.
The operator can choose which to apply fi rst.
..
(in the example 0.17 oz, A,Figure 5-31 )
(in the example 1.6 oz, B,Figure 5-31 )
0,17
oz
1,6
oz
0,35
oz
0,35
oz
0,17
oz
1,6
oz