User Manual
17
SMTP Port:
indicates sender port of SMTP server. Generally the SMTP port value is 25, but there are
exceptions, for example, SMTP port of G-mail server should be 465.
SMTP server:
indicates server address you used.
Sender address:
indicates sender’s email address. The email address should be consistent with the
server you use. That is to say, when you use email address –
, the according server should
be smtp.gmail.com.
Receiver address:
indicates receiver’s email address. The email address is used to receive image
transmitted from motion detection alarm of DVR. Please clear the images you have received as soon as possible
to avoid overloading your email account. For detailed SMTP protocols settings refer to the below pictures 5-26
5.3.5.3
PTZ Set
Enter into [Main menu
Device
PTZ Set] to select the
channel you desire to control and set PTZ protocol (Pelco-D or
Pelco-P), Baud Rate (1200, 2400, 4800, 9600), Data Bit (8,7,6,5),
Stop bit (1, 2), Parity Check (None, Odd, Even Mark Space),
Address Code and Cruise status respectively. Please note the PTZ
device can be activated only if a channel is in accordance with the
PTZ camera selected.
Picture 5-25
Picture 5-26
Picture 5-28
Summary of Contents for jed2216t
Page 1: ...1...
