User Manual
7
Chapter3 Connecting DVR
3.1
HDD installation
Caution:
Please do not Install or take out hard drive when DVR is running!
The model has a HDD drawer. Please use provided key to take out the HDD drawer and put HDD into the
drawer correctly.
Please follow the below steps to install the HDD:
1. Loosen the screw from upper cover and remove the upper cover and LCD on the power break mode;
2. Insert data cord and power cable into HDD securely;
3. Fix the HDD on the rack;
4. Put the upper cover and LCD back carefully, re-attach screws.
3.2
Camera and Monitor Connection
Connect camera cable to video input of DVR, and from video output of DVR to Monitor via BNC
connector (Refer to section2.3-Rear Panel); or
If the camera is a PTZ speed dome, you could connect RS485 A & B to the according port of DVR
respectively (refer to system figuration on Chapter 8).
3.3
Power Supply connection
Please only use the power adapter supplied with the
DVR.
Summary of Contents for jed2216t
Page 1: ...1...
