Jetter JHN Series, User Manual

Page: 37 / 228

Servomotor series JHN, JHQ, and JL – User Manual General technical data
Jetter AG 37
4 General technical data
4.1 Compatibility of the series
The tolerance of the connector thread of the motors corresponds to DIN 13, class 6g - 6H. The
motors are supplied with Intercontec connectors. The thread tolerance of the Intercontec
connectors is the same as that of the motor connectors. For motors with the cable without
connector option, the customer must select and install connectors with this tolerance.
The wiring of the motor and encoder connectors of all series is identical.
Since the hole circle, centering and shaft are also the same within one flange size, series can be
exchanged. E.g. JHN4, JHQ4 and JL4 This does not apply to the discontinued JK motor series.
4.2 Flange sizes - Overview
The table below gives an overview of centering, hole circle, shaft, key size, continuous stall torque
Mo and length with constant flange size:
Flange JHNJ
L
JHQ Cent
ering
Hole
circle
Shaft
(x1)
With
feath
er
key
Feather
key to
DIN
6885-A
(x1)
JHN
M
o
/length
JHQ
M
o
/length
JL
M
o
/length
1 37 25 41.5 6x20 2P9 2x2x10
0.1 – 0.2/
81 - 111
12 40 30 46 8x25 3P9 3x3x12
0.18 – 0.32/
63 - 77
2
55 58 40 63 9x24 3P9 3x3x15 0.28 - 0.95/
67 - 112
0.25 – 1.25/
87 - 135
0.25 – 1.25/
98 - 143
22 60 50 70 14x30 5P9 5x5x20
0.7 – 1.4/
84 - 104
23
70 60 75 11x23
14x30
4P9
5P9
4x4x15
5x5x20
0.6 – 3.0/
112 - 182
24 80 70 90 16x40 5P9 5x5x25
0.7 – 2.7/
86 - 120
3
86 91.3 80 100 14x30 5P9 5x5x20
1.15 – 4.8/
82 - 172
1.35 – 4.5/
122 - 180
0.65 – 3.0/
109 - 181
4 98 100 95 115 19x40 6P9 6x6x32
5.1 – 11.3/
113 - 203
4 – 10/
150 - 214
5.3 – 7.5/
176 - 221
45 116 110 130
19x40
24x50
6P9
8P9
6x6x32
8x7x40
6 – 14/
168 - 233
5
142 142 130 165 24x50 8P9 8x7x40
12 – 24/
157 - 247
4.5 – 26/
148 - 298
12 – 24/
226 - 311
51 142 130 165 28x58 8P9 8x7x40
29 – 38/
338 - 405
6 190 190 180 215 24x50 8P9 8x7x40
18 – 44/
158 - 258
20 – 28/
195 - 218
19 – 29/
242 - 317
7
190 190 180 215 28x58 8P9 8x7x40
30 – 60/
181 - 271
36 – 42/
240 - 263
32 – 40/
264 - 294
71 190 180 215 38x80 10P9 10x8x70
56 – 80/
308 - 414
8 240 240 230 265
38x80
42x110
10P9
12P9
10x6x63
12x8x63
42 -120/
293 - 493
40 -115/
310 - 514
M
o
: Continuous stall torque in Nm
Length: With resolver without brake in mm