Jetter JetMove 225-480, User Manual, Page: 94 / 126

12 Ethernet Interface (Option)
JetWeb
94 Jetter AG
12.3.2 The DIP switches
The switches are evaluated at switching on the JetMove 225-480...-OEM. Switches
1 through 8 influence the IP address; switches 9 through 10 influence starting the
operating system.
Booting
After booting, the switch has no influence to the interface functions. The current
position of the switch can be scanned in register 10181.
12.4 Setting the IP Address
There are 4 ways to assign an IP address to a JetMove 225-480...-OEM. The actually
used IP address can be scanned in register 2931.
12.4.1 Default IP address
If, at activating the controller, DIP switches 1 through 8 are in "OFF" position, the
JetMove 225-480...-OEM has got IP address 192.168.10.15.
If, at the other possibilities of setting, it is not clear which IP address is being used, a
definite state can be achieved by this way of "emergency setting".
Switches 9 and 10
Position Meaning
9 = OFF, 10 = OFF (NORMAL
OPERATION) Normal function of the Ethernet
interface
9 = OFF, 10 = ON (LOAD) The boot process proceeds as far as to
the initial program loader of the
Ethernet interface
9 = ON Reserved