Jetter JetMove 225-480, User Manual, Page: 11 / 126

JetMove 225-480 1.1 General Information
Jetter AG 11
Table of Contents
1 Safety Instructions
1.1 General Information
The digital servo amplifier JetMove 225-480 fulfils the accepted safety regulations
and standards. Special emphasis was given to the safety of the users.
The following additional regulations apply to the user:
• pertinent accident prevention regulations;
• accepted safety rules;
• EC guidelines and other country-specific regulations.
1.1.1 Intended conditions of use
Usage as intended includes operation in accordance with the operating instructions.
The digital servo amplifier JetMove 225-480 may only be operated in the closed
control cabinet and within the range of the set values.
Do not apply a voltage to the digital servo amplifier JetMove 225-480 that is
higher than the prescribed operating voltage.
Each of the three phases of the digital servo amplifier JetMove 225-480 has got an
operating voltage ranging between AC 340 V and AC 530 V. Thus, the digital servo
amplifier JetMove 225-480 comes under the EG Low Voltage Directive.
It is the explicitpurpose of the digital servo controller JetMove 225-480 to
torque-, speed- and/or position-control, and to drive brushless synchronous
servo motors. The rated voltage of the motors must be higher than, or at least
equal to, the DC link voltage supplied by the servo amplifier.
The digital servo amplifier JetMove 225-480 is used to control machinery, such as
conveyors, production machines, and handling machines.
1.1.2 Usage other than intended
The digital servo amplifier JetMove 225-480 must not be used in technical
systems which to a high degree have to be fail-save, e. g. ropeways and
aeroplanes.
Do not apply the integrated brake control in safety-relevant systems.
If the digital servo amplifier JetMove 225-480 is to be run under operating conditions,
which differ from the conditions mentioned in
chapter 3 "Operating Conditions", page 31, the manufacturer is to be contacted
beforehand.