Jetter JetMove 225-480, User Manual, Page: 59 / 126

JetMove 225-480 7.4 HIPERFACE Connection
Jetter AG 59
7.4 HIPERFACE Connection
7.4.1 Specifications
Specification of Mating Connector for X61 (Encoder)
• 9-pin male SUB-D connector
• Metallized enclosure
Specification of HIPERFACE Cable
• Cable size: 4 * 2 * 0.14 mm² + 2 * 0.5 mm² (AWG 26(4*2) + AWG 20(2))
2 * 0.5 mm² (AWG 20(2)) are for connection of the power supply and GND signal.
• Cores have to be twisted in pairs and have to be included in an overall shielding.
• The following signal lines have to be twisted in pairs:
Sine + and reference sine
and reference cosine
DATA - and DATA +
0 V and power supply
• The shield has to be connected to the connector housings on both ends of the
cable with the greatest possible surface area.
• Material: Copper
• Temperature class: 60 °C
• Max. cable length: 50 m
7.4.2 HIPERFACE cable with mating connector
Note!
The resolver respectively HIPERFACE mating connector of the Jetter motor
series JL, JK and JH and can be ordered from Jetter AG by supplying the
following particulars:
Article no. 15100069 Resolver / HIPERFACE
The complete HIPERFACE cable connecting the servo amplifier series
JetMove 2xx and the motor types JL, JK and JH can be ordered from Jetter AG
by supplying the following cable designation and the respective cable length in
[cm]:
KAY-0723-xxxx for the digital servo amplifier series JetMove 2xx