Jetter JetMove 225-480, User Manual, Page: 22 / 126

1 Safety Instructions
JetWeb
22 Jetter AG
Fig. 2: Shielding of SUB-D connectors in conformity with EMC standards
The entire shield must be drawn behind the isolation, and then be
clamped under a flat earthed cable strap at the greatest possible surface
area.
If male connectors are used:
Only use metallized connectors, e.g. SUB-D with metallized housing.
Make sure that the strain relief is directly connected with the housing in this
case as well (see Fig. 2).