Jetter JetMove 225-480, User Manual, Page: 26 / 126

2 Installing the JetMove 225-480
JetWeb
26 Jetter AG
2.2 Mechanical Installation
Prior to installing the digital servo amplifier, check it for possible
transport damages.
Check the shipment for completeness.
To ensure proper functioning of the JetMove 225-480 check whether
the mounting plate in the electric cabinet is unpainted.
The only possible mounting direction is vertical - see “Rear and front
view of the JetMove 225-480 enclosure with mounting hole" on
page 27.
Please make sure there is a clearance of at least 100 mm under and
above the JetMove 225-480 - unobstructed ventilation must be
ensured.
Please mark on the panel two positions for the fastening screw threads
of the JetMove 225-480 (see fig. 4, page 27).
Drill the holes and cut the respective threads into the panel.
Screw the corresponding fitting bolts into the thread by approximately
half of their length.
By means of the oblong holes in the rear plate, hang up the
JetMove 225-480 by the fitting bolts; then screw them tightly.