Jetter JetMove 225-480, User Manual, Page: 38 / 126

5 Technical Data
JetWeb
38 Jetter AG
Short-circuit protection, motor side Designed for:
• Phase to phase
• Phase to earth
Motor overload protection Refer to "Motor Protection" on page 41
Motor cable
Cable size
Material
Capacitance
Temperature class
Max. length of motor cable
4 * 2.5 mm
2
min. (AWG 14)
Copper
< 150 pF / m
> 60 °C
50 m max.
(for greater length please contact
Jetter AG)
Line filter Line filter ensuring EMC
in a
residential
environment to DIN EN 61800-3. The
following filters can be applied with input
circuits:
– FMAC-932-2510 with I
r
= 25 A
– FMAC-934-3610 with I
r
= 36 A
See "Note 2!" on page 40.
Voltage supply of processor logics
(demands on power supply module) • DC 24 V (20 .. 30 V)
•

0.6 A
• The voltage output has to comply with
the power supply unit of the SELV or
PELV type.
Internal ballast resistor • Resistor: 60 (PTC)
• Continuous output: 210 Watt
(energy dissipation is dependent on the
actual heat sink temperature.)
• Maximum capacity: 11 kW for 0.6 s
• Overload protection internal (warning
and error)
External ballast resistor In order to achieve greater brake power, an
external ballast resistor can be installed.
For this, see "Connection of External
Ballast Resistor and DC link Circuit of
Another JM-225-480" on page 66
Residual voltage To avoid hazard of electrical shock wait at
least 7 minutes after switching-off the
digital servo amplifier before attempting to
pull out the plug or remove this unit (see
page 20).
Leakage current > 3.5 mA
See "Danger" on page 40.
Electrical Specifications
