Jetter JetMove 225-480, User Manual, Page: 108 / 126

14 Counting Input (Option)
JetWeb
108 Jetter AG
14.2.2 Description of connections
Specification of Mating Connector for X72 (ENCODER)
• 9-pin male SUB-D connector
• metallized enclosure
EnDat Cable Specification
• Cable size: 2 * 2 * 0.14 mm² + 2 * 0.25 mm² (AWG 26(4) + AWG23(2))
2 * 0.25 mm² has to be used for power supply and GND.
• The cables have to be twisted in pairs and included in an overall shielding.
• The following signal lines have to be twisted in pairs:
DATA - and DATA +
Clock - and Clock +
0 V and voltage supply
• The shield has to be connected to the connector housings on both ends of the
cable with the greatest possible surface area.
• Material: Copper
• Temperature class: 60 °C
• Maximum cable length: 100 m
14.2.3 EnDat cable with mating connector
HIPERFACE mating connector (solder side)
Fig. 31: View on RC series mating connector of the EnDat (internal thread
M23)
Note!
The resolver, HIPERFACE, respectively EnDat mating connector of the
synchronous servo motor series JL and JK can be ordered from Jetter AG by
supplying the following particulars:
Article no. 15100069 Resolver / HIPERFACE
The complete HIPERFACE/EnDat cable connecting the servo amplifier series
JetMove 2xx and the synchronous servo motor series JL and JK can be ordered
from Jetter AG by supplying the following cable designation and the respective
cable length in [cm]:
Cable confection no. 723 for the servo amplifier series JetMove 2xx
Solder
Side
12
9
11
5
7
8
6
4
10 2
1
3