37
Once the base plate and front panel have been
removed insert the water-heated cuvette holder
into the chamber, ensuring the base plate rests
flat in the unit. Replace the screws 1 to 4,
securing the accessory in place.
Fit the custom front panel to the unit ensuring
the metal pipes on the accessory are aligned
and fed through the two holes in the front
panel. The metal pipes should protrude from
the outer casing. Secure the custom accessory
front plate to the unit with screws 5 and 6.
Summary of Contents for 7300
Page 1: ...Operating Manual 730 005 REV D 08 14 Model 7300 and 7305 Spectrophotometer...
Page 2: ...2...
Page 56: ...56 SECTION 11 Declaration of Conformity...
Page 57: ...57...
