24
The settings menu is accessed through the operating
menu by pressing the key adjacent to the settings icon.
In the settings menu press the key below the
wavelength icon.
This will open a number entry screen. Use the keys at
the bottom of the screen to select the digit to be
adjusted. Use the keys adjacent to the arrow icons to
increase or decrease the wavelength to the required
number. Press the key adjacent to the tick icon to save
the changes and return to the settings menu.
6.2.2
Settings
The settings menu enables the wavelength, units, resolution, standard or factor to be set and is
accessed from the operating menu by pressing the key adjacent to the settings icon. Once all of the
required settings have been entered press the key adjacent to the tick icon to save and return to the
operating menu.
Fig 6.2.2
–
Settings Menu
When setting the method parameters either the standard or the factor should be selected. The
standard should be used if the factor is not known as selecting this option will calculate the factor. If
the factor is known it is not necessary to measure a known standard
’s concentration. When the
standard or factor is not selected the value should be set to 1.00.
Selecting
concentration
units
Selecting a wavelength
Standard menu
Factor menu
Tick icon
Selecting resolution
Summary of Contents for 7300
Page 1: ...Operating Manual 730 005 REV D 08 14 Model 7300 and 7305 Spectrophotometer...
Page 2: ...2...
Page 56: ...56 SECTION 11 Declaration of Conformity...
Page 57: ...57...
