jenway 7300, Operating Manual

Page: 34 / 62

34
SECTION 8
– Accessories and Spare Parts
8.1 OPTIONAL ACCESSORIES
Part Code Description of Accessory
660 101 Internal printer
735 401 Automatic 8 cell turret
735 201 Sipper pump
735 301 Peltier
735 701 Combined sipper Peltier pump
735 801 10x10mm path length cuvette holder
735 901
16/24mm test tube holder
736 001 10x100mm path length cuvette holder
736 101 10x10mm path length micro-cuvette holder
736 201 Water heated 10x10 single cell holder
035 088
Visible calibration set
035 091 UV/Visible calibration set
060 422 Moulded cuvette rack for 16 10x10mm cuvettes
735 001 Dust cover
019 146 4GB USB memory sticks for external memory
037 551 RS232 to USB converter for use with computer without a serial port
8.2 CONNECTING THE ACCESSORIES
There are two types of accessories which can be fitted in the sample chamber
– passive or active
accessories. The range of passive accessories includes 10 x 10mm single cuvette holders, single
water heated cuvette holders, adjustable path length (10 to 100 mm) cuvette holders, test tube
holders, boiling tube holders and micro-cuvette holders. The range of active accessories includes an
automated 8 cell changer, sipper pump, Peltier and combined sipper Peltier pump. The instrument
must be turned off before any accessories are fitted.
8.2.1 Internal Printer
Use a small screw driver to lift the blanking panel on the top of
the instrument. Squeeze the two clips in order to remove the
blanking panel. Disconnect the printer wires which are secured to
the underside of the blanking plate.
Unpack the printer from the packaging. Turn the printer upside
down and connect the printer wires by clipping into the connector
on the printer.
Clips