40
8.2.3.2 Peltier
For this accessory as well as removing the
passive accessory base plate, the front panel of
the instrument must also be removed. Loosen
screws 5 and 6 until the front panel can be lifted
out in the forwards direction.
Take the Peltier base plate. Connect the power
supply in the bottom of the sample chamber to
the connector on the underside of the base plate.
Place the base plate in the sample chamber.
Replace screws 1 to 4. Take the Peltier front
panel and slot into place before retightening
screws 5 and 6.
When the accessory is fitted the instrument will
look like this.
5
6
Summary of Contents for 7300
Page 1: ...Operating Manual 730 005 REV D 08 14 Model 7300 and 7305 Spectrophotometer...
Page 2: ...2...
Page 56: ...56 SECTION 11 Declaration of Conformity...
Page 57: ...57...
