23
SECTION 6
– CONCENTRATION
The concentration measurement mode enables simple measurements of absorbance and
concentration to be performed. In this measurement mode it is possible to calibrate against a
standard of a known concentration or use a known factor. The sample is measured at one
wavelength at one point in time. There are no post measurement calculations available in this
measurement mode.
6.1
MODE SPECIFIC PARAMETERS
The concentration operating menu enables measurement parameters to be changed. The utility
toolbar on the left hand side of the screen enables access to printing, print setup options and
autologging options. For more details on the different functions of the utility toolbar refer to section 7.
The settings icon enables the wavelength, units, resolution, standard or factor to be set.
Fig 6.1
- Operating Menu
6.2
METHOD SETUP
6.2.1
Selecting a Wavelength
The wavelength can be adjusted in the operating menu
or in the settings menu. To adjust the wavelength in the
operating menu use the keys adjacent to the arrow
icons to increase or decrease the wavelength.
Autolog menu
Calibrate to zero
Decrease wavelength
Settings
Print/print settings
Increase wavelength
Measure sample
Summary of Contents for 7300
Page 1: ...Operating Manual 730 005 REV D 08 14 Model 7300 and 7305 Spectrophotometer...
Page 2: ...2...
Page 56: ...56 SECTION 11 Declaration of Conformity...
Page 57: ...57...
