35
Squeeze the grey plastic clips together so that the printer top
opens. Slot the printer into the top of the instrument and push
down until it fits flush to all four sides.
Insert the paper roll into the printer
– ensuring that there is some
paper sticking out of the printer before clicking the grey plastic
back into place. Switch the instrument on. The power and error
lights on the printer will flash. Once the instrument power on tests
are complete press the feed button to check that the paper is fed
correctly.
8.2.2
Passive Accessories
Unscrew the thumb screw to undo the passive
accessory. Lift out the passive accessory. To fit a
different passive accessory simply place the
accessory in the correct orientation, align the
thumb screw and tighten to fix in place.
To replace the passive accessory with an active
accessory refer to section 8.2.3.
8.2.2.1 Water-heated cuvette holder
The water heated cuvette holder is supplied with an additional front panel which also needs to be
fitted.
Thumb
screw
Summary of Contents for 7300
Page 1: ...Operating Manual 730 005 REV D 08 14 Model 7300 and 7305 Spectrophotometer...
Page 2: ...2...
Page 56: ...56 SECTION 11 Declaration of Conformity...
Page 57: ...57...
