32
To set the time period between each measurement
press the key below the timer icon and use the keys
adjacent to the arrow icons to increase or decrease the
time in 1 second intervals. To reset the time to one
second press and hold the key below the timer icon for
2 seconds.
Once the required number of repetitions and time interval have been selected press the key adjacent
to the tick icon to save the changes and return to the operating menu.
The number of repetitions and time period will be
displayed below the autolog icon. To commence
autologging press the key below the measure sample
icon. Once the first measurement has been performed
the time period starts counting down until it reaches
zero and then the next measurement will be taken.
This will reduce the repetition number by one. When the number of repetitions reaches zero,
autologging is complete. Autologging can be stopped before all the measurements have been
completed by pressing the key adjacent to the autolog icon. Confirmation will be needed to stop
autologging. Press the key adjacent to the tick icon to confirm stopping autologging or press the key
adjacent to the cross icon to continue autologging.
7.2.2
Selecting R
esult’s Destination
The autolog menu enables the result’s destination to be
set. To select the internal printer press the key adjacent
to the printer icon. This option is only available if an
internal printer is connected. To send the results to an
external instrument such as a PC or a serial printer
press the key adjacent to the computer icon.
Summary of Contents for 7300
Page 1: ...Operating Manual 730 005 REV D 08 14 Model 7300 and 7305 Spectrophotometer...
Page 2: ...2...
Page 56: ...56 SECTION 11 Declaration of Conformity...
Page 57: ...57...
