29
Once a measurement is complete, press the key
adjacent to the settings icon, then press the key below
the units icon. This will either cycle through the
available unit options or open the units selection page.
In the units selection page, select the updated
measurement unit from the available options and press
the key adjacent to the tick icon to confirm.
In the concentration settings menu, the calibration
standard and concentration factor values are updated.
The updated concentration value and unit are shown in
the main display.
6.5.2
Changing the Concentration Factor
Users cannot adjust the concentration factor once a blank measurement is performed. If the
concentration factor needs to be changed, the user must exit and re-enter the concentration
measurement mode.
6.5.3
Changing the Calibration Standard Value
Users cannot adjust the calibration standard value once a blank measurement is performed. If the
calibration standard value needs to be changed, the user must exit and re-enter the concentration
measurement mode.
Summary of Contents for 7300
Page 1: ...Operating Manual 730 005 REV D 08 14 Model 7300 and 7305 Spectrophotometer...
Page 2: ...2...
Page 56: ...56 SECTION 11 Declaration of Conformity...
Page 57: ...57...
