38
From the rubber tubing supplied, cut two
shorter lengths of tubing and use these to
connect the internal metal pipes of the cell
block (7) to the internal metal pipes on the
outer casing (8).
Using two separate pieces of rubber tubing
connect the two external metal tubes (9) to an
external water bath and pump. Ensure the
water is pumped in through the left and out
through the right hand side of the cell block.
All tubing must be kept as short as possible
and the tubing must not be allowed to obstruct
the ligth path.
8.2.3
Active Accessories
Unscrew the thumb screw to undo the passive
accessory. Lift out the passive accessory. To fit
an active accessory unscrew screws 1 to 4 and
lift out the metal base plate.
IN OUT
Summary of Contents for 7300
Page 1: ...Operating Manual 730 005 REV D 08 14 Model 7300 and 7305 Spectrophotometer...
Page 2: ...2...
Page 56: ...56 SECTION 11 Declaration of Conformity...
Page 57: ...57...
