Jeep 2011 grand cherokee Owner'S Manual Download Page 389

Page: 389 / 724

Controlling The iPod

姞

Or External USB Device

Using Radio Buttons

To get into the iPod

威

/USB/MP3 control mode and access

a connected audio device, either press the “AUX” button
on the radio faceplate or press the VR button and say

⬙

USB

⬙

Switch to USB

⬙

. Once in the iPod

威

/USB/MP3

control mode, audio tracks (if available from audio
device) start playing over the vehicle’s audio system.

Play Mode

When switched to iPod

威

/USB/MP3 control mode, the

iPod

威

or external USB device automatically starts Play

mode. In Play mode, the following buttons on the radio
faceplate may be used to control the iPod

威

or external

USB device and display data:

•

Use the TUNE control knob to select the next or
previous track.

•

Turning it clockwise (forward) by one click, while
playing a track, skips to the next track or press the
VR button and say

⬙

Next Track

⬙

•

Turning it counterclockwise (backward) by one click,
will jump to the previous track in the list or press the
VR button and say

⬙

Previous Track

⬙

•

Jump backward in the current track by pressing and
holding the <<

button. Holding the <<

button long enough will jump to the beginning of the
current track.

•

Jump forward in the current track by pressing and
holding the

>> button.

•

A single press backward <<

or forward

>> will

jump backward or forward respectively, for five sec-
onds.

•

Use the <<

SEEK

and

SEEK

>> buttons to jump to the

previous or next track. Pressing the

SEEK

>> button

UNDERSTANDING YOUR INSTRUMENT PANEL

387

Summary of Contents for 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 grand cherokee

Reviews:

Related manuals for 2011 grand cherokee

Brands by name

Popular brands

Jeep 2011 grand cherokee, Owner'S Manual

Search results

Summary of Contents for 2011 grand cherokee

Reviews:

Related manuals for 2011 grand cherokee

Brands by name

Popular brands