Jeep 2011 grand cherokee Owner'S Manual Download Page 233

Page: 233 / 724

NOTE:

Any chassis/suspension modifications to the ve-

hicle will effect the performance of the Adaptive Cruise
Control.

Activating Adaptive Cruise Control (ACC)

You can only activate ACC if the vehicle speed is above
18 mph (30 km/h).

When the system is turned on and in the READY state,
the Electronic Vehicle Information Center (EVIC) dis-
plays “Adaptive Cruise Ready.”

When the system is OFF, the EVIC displays “Adaptive
Cruise Control Off.”

NOTE:

You cannot enable ACC under the following

conditions:

•

When in Four-Wheel Drive Low.

•

When you apply the brakes.

•

When the parking brake is set.

•

When the automatic transmission is in PARK, RE-
VERSE or NEUTRAL.

•

When pushing the RES

button without a previously

set speed in memory.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

231

Summary of Contents for 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 grand cherokee

Reviews:

Related manuals for 2011 grand cherokee

Brands by name

Popular brands

Jeep 2011 grand cherokee, Owner'S Manual

Search results

Summary of Contents for 2011 grand cherokee

Reviews:

Related manuals for 2011 grand cherokee

Brands by name

Popular brands