Jeep 2011 grand cherokee Owner'S Manual Download Page 195

Page: 195 / 724

WARNING!

(Continued)

collision. Always make sure the outboard head re-
straints are in their upright positions when the seat is
to be occupied.

NOTE:

For proper routing of a Child Seat Tether refer to

“Occupant Restraints” in “Things to Know Before Start-
ing Your Vehicle” for further information.

60/40 Split Rear Seat

To Lower Rear Seat

Either side of the rear seat can be lowered to allow for
extended cargo space and still maintain some rear seating
room.

NOTE:

Be sure that the front seats are fully upright and

positioned forward. This will allow the rear seatback to
fold down easily.

1. Pull upward on the release lever to release the seat.

NOTE:

•

Do not fold the 60% rear seat down with the left
outboard or rear center seat belt buckled.

Rear Seat Release

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

193

Summary of Contents for 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 grand cherokee

Reviews:

Related manuals for 2011 grand cherokee

Brands by name

Popular brands

Jeep 2011 grand cherokee, Owner'S Manual

Search results

Summary of Contents for 2011 grand cherokee

Reviews:

Related manuals for 2011 grand cherokee

Brands by name

Popular brands