Jeep 2011 grand cherokee Owner'S Manual Download Page 573 | Manualshive

Page: 573 / 724

background image

WARNING!

(Continued)

you use a standard weight-carrying hitch, you could
lose control of your vehicle and cause a collision.

Gross Combination Weight Rating (GCWR)

The GCWR is the total permissible weight of your vehicle
and trailer when weighed in combination.

NOTE:

The GCWR rating includes a 150 lbs (68 kg)

allowance for the presence of a driver.

Gross Axle Weight Rating (GAWR)

The GAWR is the maximum capacity of the front and rear
axles. Distribute the load over the front and rear axles
evenly. Make sure that you do not exceed either front or
rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica-
tion Label” in “Starting and Operating” for further
information.

WARNING!

It is important that you do not exceed the maximum
front or rear GAWR. A dangerous driving condition
can result if either rating is exceeded. You could lose
control of the vehicle and have a collision.

Tongue Weight (TW)

The tongue weight is the downward force exerted on the
hitch ball by the trailer. In most cases it should not be less
than 10% or more than 15% of the trailer load. You must
consider this as part of the load on your vehicle.

Frontal Area

The frontal area is the maximum height multiplied by the
maximum width of the front of a trailer.

5

STARTING AND OPERATING

571

«
...
571
572
573
574
575
...
»

Summary of Contents for 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 grand cherokee

Brand: Happy Orange Pages: 2

Brand: cam Pages: 28

Brand: GMC Pages: 425

WirelessAIR 73000EZ

Brand: Air Lift Pages: 12

Brand: Toyota Pages: 371

2011 Civic Sedan

Brand: Honda Pages: 5

990E0-54P56-000

Brand: Suzuki Pages: 12

Brand: Toro Pages: 24

Brand: Yutrax Pages: 8

2005 JR41 Stratus

Brand: Dodge Pages: 293

GMC Yukon Denali 2005

Brand: Cadillac Pages: 456

Brand: Saab Pages: 63

Brand: R&G Pages: 20

Brand: Whispbar Pages: 70

Brand: AIS Pages: 2

Brand: Club Car Pages: 286

Grand Cherokee SRT 2019

Brand: Jeep Pages: 656

Brand: Pontiac Pages: 486

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands