Jeep 2011 grand cherokee Owner'S Manual Download Page 98

Page: 98 / 724

What is the weight limit (child’s

weight of the child restraint) for using the

LATCH anchorage system to attach the

child restraint?

65 lbs (29.5 kg)

Use the LATCH anchorage system until

the combined weight of the child and the

child restraint is 65 lbs (29.5 kg). Use the

seat belt and tether anchor instead of the

LATCH system once the combined weight

is more than 65 lbs (29.5 kg).

Can the LATCH anchorages and the seat

belt be used together to attach a rear-

facing or forward-facing child restraint?

Do not use the seat belt when you use the

LATCH anchorage system to attach a rear-

facing or forward-facing child restraint.

Can a child seat be installed in the center

position using the inner LATCH lower an-

chorages?

Use the seat belt and tether anchor to install

a child seat in the center seating position.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 grand cherokee

Reviews:

Related manuals for 2011 grand cherokee

Brands by name

Popular brands

Jeep 2011 grand cherokee, Owner'S Manual

Search results

Summary of Contents for 2011 grand cherokee

Reviews:

Related manuals for 2011 grand cherokee

Brands by name

Popular brands