Jeep 2011 grand cherokee Owner'S Manual Download Page 457

Page: 457 / 724

Installing And Removing The ENGINE
START/STOP Button

Installing The Button

1. Remove the key fob from the ignition switch.

2. Insert the ENGINE START/STOP button into the ignition

switch with the lettering facing up and readable.

3. Press firmly on the center of the button to secure it into

position.

Removing The Button

1. The ENGINE START/STOP button can be removed

from the ignition switch for key fob use.

2. Insert the metal part of the emergency key under the

chrome bezel at the 6 o’clock position and gently pry
the button loose.

NOTE:

The ENGINE START/STOP button should only

be removed or inserted with the ignition in the OFF
position (OFF position for Keyless Enter-N-Go™).

Normal Starting

Using The ENGINE START/STOP Button

1. The transmission must be in PARK or NEUTRAL.

2. Press and hold the brake pedal while pressing the

ENGINE START/STOP button once.

3. The system takes over and attempts to start the

vehicle. If the vehicle fails to start, the starter will
disengage automatically after 10 seconds.

4. If you wish to stop the cranking of the engine prior to

the engine starting, press the button again.

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the
accelerator pedal.

STARTING AND OPERATING

455

Summary of Contents for 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 grand cherokee

Reviews:

Jeep 2011 grand cherokee, Owner'S Manual, Page: 457 / 724

Search results

Summary of Contents for 2011 grand cherokee

Reviews: