Jeep 2011 grand cherokee Owner'S Manual Download Page 269

Page: 269 / 724

CAUTION!

•

To avoid vehicle damage, ParkView

威

should only

be used as a parking aid. The ParkView

威

camera is

unable to view every obstacle or object in your
drive path.

•

To avoid vehicle damage, the vehicle must be
driven slowly when using ParkView

威

to be able to

stop in time when an obstacle is seen. It is recom-
mended that the driver look frequently over his/her
shoulder when using ParkView

威

NOTE:

If snow, ice, mud, or any foreign substance

builds up on the camera lens, clean the lens, rinse with
water, and dry with a soft cloth. Do not cover the lens.

Turning ParkView

姞

On Or Off — With

Navigation/Multimedia Radio

1. Press the “menu” hard-key.

2. Select “system setup” soft-key.

3. Press the “camera setup” soft-key.

4. Enable or disable the rear camera feature by selecting

the “enable rear camera in reverse” soft-key.

5. Press the “save” soft-key.

Turning ParkView

姞

On Or Off — Without

Navigation/Multimedia Radio

1. Press the “menu” hard-key.

2. Select “system setup” soft-key.

3. Enable or disable the rear camera feature by selecting

“enable rear camera in reverse” soft-key.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

267

Summary of Contents for 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 grand cherokee

Reviews:

Jeep 2011 grand cherokee, Owner'S Manual, Page: 269 / 724

Search results

Summary of Contents for 2011 grand cherokee

Reviews: