Jeep 2011 grand cherokee Owner'S Manual Download Page 539 | Manualshive

Page: 539 / 724

background image

Spare Tire Matching Original Equipped Tire And
Wheel – If Equipped

Your vehicle may be equipped with a spare tire and
wheel equivalent in look and function to the original
equipment tire and wheel found on the front or rear axle
of your vehicle. This spare tire may be used in the tire
rotation for your vehicle. If your vehicle has this option
refer to an authorized tire dealer for the recommended
tire rotation pattern.

If your vehicle is not equipped with an original equip-
ment tire and wheel as a spare, a non-matching tempo-
rary emergency use spare may be equipped with your
vehicle. Temporary use spares are engineered to be used
only with your vehicle. Your vehicle may be equipped
with one of the following types of non-matching tempo-
rary use spares; compact, full size, or limited-use. Do not
install more than one non-matching temporary use spare
tire/wheel on the vehicle at any given time.

CAUTION!

Because of the reduced ground clearance, do not take
your vehicle through an automatic car wash with a
compact, full size or limited-use temporary spare
installed. Damage to the vehicle may result.

Compact Spare Tire – If Equipped

The compact spare is for temporary emergency use only.
You can identify if your vehicle is equipped with a
compact spare by looking at the spare tire description on
the Tire and Loading Information Placard located on the
driver’s side door opening or on the sidewall of the tire.
Compact spare tire descriptions begin with the letter “T”
or “S” preceding the size designation. Example: T145/
80D18 103M.

T, S = Temporary Spare Tire

5

STARTING AND OPERATING

537

«
...
537
538
539
540
541
...
»

Summary of Contents for 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 grand cherokee

Brand: ZAPTEC Pages: 240

Brand: Daihatsu Pages: 41

Brand: Daihatsu Pages: 268

2011 grand cherokee

Brand: Jeep Pages: 22

2013 Grand Cherokee

Brand: Jeep Pages: 704

Brand: Jeep Pages: 558

Brand: RAM Pages: 292

Brand: RAM Pages: 116

Brand: Victory 4x4 Pages: 13

Transit Vancouver Wagon

Brand: Webasto Pages: 44

Brand: BMW Pages: 21

Brand: GARO Pages: 15

Brand: Scosche Pages: 12

XC70 - ANNEXE 808

Brand: Volvo Pages: 8

PRIME DESIGN UXV 211

Brand: Safe Fleet Pages: 8

Brand: 3SIXT Pages: 4

Brand: Bazooka Pages: 2

Brand: TEINHOF Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands