Jeep 2011 grand cherokee Owner'S Manual Download Page 504 | Manualshive

Page: 504 / 724

background image

and increased ease of maneuverability in tight spaces.
The system will vary its assist to provide light efforts
while parking and good feel while driving. If the electro-
hydraulic power steering system experiences a fault that
prevents it from providing power steering assist, then the
system will provide mechanical steering capability.

CAUTION!

Extreme steering maneuvers may cause the electri-
cally driven pump to reduce or stop power steering
assistance in order to prevent damage to the system.
Normal operation will resume once the system is
allowed to cool.

If the “SERVICE POWER STEERING SYSTEM”
message and a flashing icon are displayed on
the EVIC screen, it indicates that the vehicle
needs to be taken to the dealer for service. It is

likely the vehicle has lost power steering assistance. Refer
to “Electronic Vehicle Information (EVIC)” in “Under-
standing Your Instrument Panel” for further information.

If the “POWER STEERING SYSTEM OVER TEMP” mes-
sage and an icon are displayed on the EVIC screen, it
indicates that extreme steering maneuvers may have
occurred, which caused an over temperature condition in
the power steering system. You will lose power steering
assistance momentarily until the over temperature con-
dition no longer exists. Once driving conditions are safe,
then pull over and let vehicle idle for a few moments
until the light turns off. Refer to “Electronic Vehicle
Information (EVIC)” in “Understanding Your Instrument
Panel” for further information.

502

STARTING AND OPERATING

«
...
502
503
504
505
506
...
»

Summary of Contents for 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 grand cherokee

Brand: ZAPTEC Pages: 64

Brand: ZAPTEC Pages: 24

Brand: Falcon Pages: 8

Brand: Aries Pages: 3

Brand: Kia Pages: 10

Brand: Audi Pages: 9

Brand: Belkin Pages: 4

Brand: PEUGEOT Pages: 249

Tata Indigo Diesel

Brand: TATA Motors Pages: 190

Prime Design HBR-E-FT33B

Brand: Safe Fleet Pages: 12

Challenger 2013

Brand: Dodge Pages: 543

Brand: Hyundai Pages: 11

1506-PHX Cargo Plus

Brand: Ranger design Pages: 8

Brand: AUTOTECH Pages: 1

Brand: rockymounts Pages: 6

2010 Challenger SRT

Brand: Dodge Pages: 444

Brand: Prorack Pages: 15

Brand: ROADGEAR Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands