Jeep 2011 grand cherokee Owner'S Manual Download Page 324 | Manualshive

Page: 324 / 724

background image

The light also will turn on when the parking brake is
applied with the ignition switch in the ON/RUN position.

NOTE:

This light shows only that the parking brake is

applied. It does not show the degree of brake application .

15. Anti-Lock Brake (ABS) Light

This light monitors the Anti-Lock Brake System
(ABS). The light will turn on when the ignition
switch is turned to the ON/RUN position and
may stay on for as long as four seconds.

If the ABS light remains on or turns on while driving, it
indicates that the Anti-Lock portion of the brake system
is not functioning and that service is required. However,
the conventional brake system will continue to operate
normally if the BRAKE warning light is not on.

If the ABS light is on, the brake system should be serviced
as soon as possible to restore the benefits of Anti-Lock
brakes. If the ABS light does not turn on when the
ignition switch is turned to the ON/RUN position, have
the light inspected by an authorized dealer.

16. 4 LOW

This light alerts the driver that the vehicle is in
the four-wheel drive LOW mode. The front and
rear driveshafts are mechanically locked to-
gether forcing the front and rear wheels to

rotate at the same speed. Low range provides a greater
gear reduction ratio to provide increased torque at the
wheels.

For further information on four-wheel drive operation
and proper use, refer to “Four-Wheel Drive Operation —
If Equipped” in “Starting And Operating”.

322

UNDERSTANDING YOUR INSTRUMENT PANEL

«
...
322
323
324
325
326
...
»

Summary of Contents for 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 grand cherokee

Brand: Uniden Pages: 16

Brand: Uniden Pages: 20

Brand: Wallbox Pages: 7

Brand: Carcomm Pages: 2

Brand: Whispbar Pages: 14

Brand: GMC Pages: 425

Brand: Chariot Carriers Pages: 3

Brand: Caltrend Pages: 2

Brand: Audiovox Pages: 1

EGR-3PVE-COLOUR

Brand: EGR Pages: 28

Brand: Jeep Pages: 1528

Sedan CIVIC 2022

Brand: Honda Pages: 701

Brand: T-Mobile Pages: 2

Brand: PUTCO Pages: 2

Brand: Thule Pages: 8

Brand: ULTIMATE SPEED Pages: 56

Brand: Buick Pages: 58

Brand: PMT Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands