JDS Uniphase SmartClass E1, User Manual

Page: 102 / 144

Chapter 7 Test Results
Pulse shape results
86 SmartClass E1 Tester User’s Guide
VF results
The VF category lists the level and frequency of the current VF tones pattern
you selected for the signal you are transmitting.
Freezing test results
You can freeze the E1 test results display at any time during the course of your
test.
To freeze test results
1 Press the Cancel key until you get to the E1 BERT menu.
2 Select Action .
A menu of actions applicable to you test appears.
3 Select Freeze Results .
A message appears indicating the tester is freezing results.
The results display freezes, and the status bar at the bottom of the result
display blinks and indicates that results are frozen. Results continue to accu-
mulate in the background.
To unfreeze results, return to the Action menu and select Unfreeze Results .
Pulse shape results
There are two result categories in the pulse shape application:
– Summary
– Pulse Shape
Summary
The Pulse Shape Summary result category displays a large “All Summary
Results OK” message if no anomalies or defects have been detected. If anom-
alies are detected, results are displayed.
SESR Severely Errored Seconds Ratio. The ratio of severely errored
seconds to the number of available seconds.
UAS Unavailable Seconds. A count of the number of test seconds
which met the ITU-T Rec. M.2100 definition of unavailable time.
Table 19 M.2100 OOS performance results (Continued)
Result Description
NOTE:
The Pulse Shape results will only be available if you purchased the Pulse
Shape option.
For information about purchasing options for the SmartClass E1 Tester, con-
tact your JDSU representative or your local JDSU sales office. You can also
contact JDSU through the company web site,
www.jdsu.com .