7
4.
PRINTER
The characters are printed using one matrix of points printed by of one fixed thermal head.
Printing ability is 28 characters for receipt and 28 characters for the journal.Double height
and double width of characters are also available.If apply double width for numeric result will be
obviously inferior.Printing speed is equal to 15 lines/second.
G-556 can prevent paper margin of journal (default) receipt (optional), signalize by
appropriate device that inhabit the operation of ECR or provoke an opportune acoustic and visual
signalling in dependency of the ECR setting.
In any case, to the attainment of the end of one of the two paper rolls, the ECR however
signals the paper end either for receipt and for journal interrupting just the operation and visualizing
an appropriate message.
Printing with an automatic cutter that comes activated to the term of the printing of every
receipt.
Main characteristics of receipt printing are : remarkable speed of emission. Essentially quick
paper feed, the low level of noisiness obtained.Special materials and high technology of thermal
printer support, the excellent facility of substitution of the rolls.
On G-556, it is activate to printing graphical LOGO fixed or personalizable in any images or
own brand name/activity.
5
SUBSTITUTION COILS
The substitution of the coils paper on G-556 is an operation of extreme simplicity and particular
conception with printing. It has been planned and constructed. The substitution of the paper on G-556 is much
similar to the substitution of the paper of FAX machine.
ATTENTION!!!! :
The operations of substitution of the paper coils must be made
which ECR is switch ON, otherwise the ECR will not be in
condition to realize that the substitution has been executed, so
"paper near end" signal will not be interrupted.
1
2
3
1 : To raise the advanced part of printing
press towards the bottom bar in metal
placed at the front part of the same printer.
2 : To place the coils correctly or a new coil,
raised the advance part of printer, pay
attention that the coil supports must be
present on metallic support at the bottom.
3 : Close the advance part of printer holding,
borders of paper coils (Receipt and
Journal) pulled towards to the front of the
ECR, crush with force over the advanced
part of printer in order to close and block
the cover coils.
