43
9.4 AUTOMATIC RECEIPT CUTTING SETTING
It's possible to enable or to disable the automatic receipt cutting with the key in "Reg", by
the operation described here below :
R
(X)
Help - Info
X
: 2 = Automatic cutter enabled
3 = Automatic cutter disabled
Help - Info : "HELP" key
Note :
the operation described over can be executed anytime with the key in "Reg", also
during a receipt execution.
9.5
PROTECTED FUNCTIONS (SUPERVISOR)
On G-556 it is possible to define the ability to execute "delicate" operations, as for
example %, (+), (-), Void, R.M., reports execution, etc..., like possible operation or not
possible operation for every Clerk on the ECR.
In this way it will be possible to limit the use of the delicate operations to people
authorized to their execution, diversifying also the levels of qualification.
It exists a code defined like "SUPERVISOR" that can set up by the following
programmation, by the use of this code it will be possible to execute all "delicate" operations,
replacing the inhibited operator during the receipt, this to give the possibility to the
responsible person to control operations of Void, E.C., Reduction in price, etc.... The
"Supervisor" code can be activate on G-556 by the Clerk key.
PROGRAMMING SUPERVISOR CODE (Key in "PRG")
P
(3)
X (ABCDEF) SUB-TOTAL
(ABCDEF) SUB-TOTAL
#
The first and second formulation of the "Supervisor" code, must to be equal in order
to make that the programming of the code comes accepted from the ECR. During
inputing the "Supervisor" code, it does not come neither visualized nor printed from
the ECR for security reasons.
ABCDEF
=
"Supervisor" code
Es.
:
ABCDEF
(It is not necessary to insert all and the six figures ABCDEF)
123456 =
123456
3549 =
3549
DEFAULT :
4 =
4
The codes indicated here below, cannot be used in the ECR like "SUPERVISOR
Code":
0
1
2
3
112233
332211
9999
t
