58
9.30
HARD PLU
It's possible to set directly a PLU code (internal PLU or external PLU on PC) on a key
in the ECR's keyboard, this to have the possibility to call a PLU with the simple pression of
a key without having to input codes or to read BAR-CODE with scanner. In order to refer
the PLU code to call through the key pression it will be necessary to proceed like described
here below with the procedure of configuration of the keyboard already described in
paragraph 9.1.4. This operation will assign exclusively the code to recall to the key and
therefore all the other programmings concerning to the PLU, in case of internal PLU, must
be executed like already described in paragraphs 9.27, 9.28 and 9.29 with the difference
that rather than to use the procedure :
(PLU code) PLU or reading of PLU bar code with the scanner, it'll be possible
to press directly the key to which the code of the PLU has been assigned.
ALLOCATION OF PLU CODE ON A KEY:
P (99) X/Time (CCC..C) X/Time (T)
#
CCC..C
=
PLU's code refer to the key
T
=
key to which link the PLU code
Note :
F
it is possible to link to the direct key pression on keyboard all the types of PLU
available on G-556 (internal PLU and external PLU)
F
the sequence (CCC..C) X/Time can be replaced from the reading through
scanner of the bar code of the product.
9.31
PLU STOCK ADJUSTMENT
It's possible to adjust the stock quantity of PLU with variations either positive
(load) than negative (drainage) ; obviously also the sale transactions (receipts) modify
the stock quantity.
X
(99)
TOT.2
(QQ...Q) X/Time (PLU code) PLU
TOT.1
QQ...Q
:
quantity (until 6 entire figures plus 2 decimals)
Examples
12 pz.
à
QQ...Q
=
12
123,85 Kg.
à
QQ...Q
=
123,85
Note :
F
sequence (PLU code) PLU can be replaced from the reading through
scanner of the bar-code of the product or from the direct pressure of the key
Hard PLU.
KEY
to repeat for other PLU
KEY
to repeat for several PLU codes
R.M. key in
case of (-)
