135
13.47 BLIND PLU FUNCTION
There is the possibility to make so that, in case it's used the function of recording of
the operations of sale inside the memory area used for the LOG of the transactions, in this
case it's possible to record on this memory area also the sale of eventual PLUs not existing
inside the PLUs’ memory of the ECR (Eg. last season).
This to avoid that some selling data of articles occasionally remained to shelf are lost
but without having to occupy space in PLU memory in order to insert articles with insufficient
probabilities of being sold.
To use this function it'll be obviously necessary to assign on programming mode a
Dept. to which the amounts of sale of the PLU not in memory will be reported.
The Department will have for the PLU not in memory (blind PLU) same functions of the
Departments to which the normal PLU are linked to in programming mode (see status and
totalizzations).
13.47.1 BLIND PLU REGISTRATION
In case that, during a sale receipt at the reading by the scanner of PLU bar-code or
if after the PLU code input and PLU key the E106 error message is showed on ECR's display
to indicate that the PLU is not present in the inside the ECR's memory, it will be possible
however to register the PLU's sale without to lose no data, eliminating the E106 error
condition with CL key and operating in the following mode :
R (NN..N) PLU PRICE (CCC..C) PLU
NN..N
=
amount of sale of the PLU (max 8 digits)
CCC..C
=
PLU code (max. 12 digits)
Note :
The sequence (CCC... C) PLU can be replaced from the reading through
scanner of the bar-code of the product.
KEY