4-14
GO
-KARTS
B
U
MPERBOAT
S
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
503-304-8899
ENDURANCE CL
UTCH PLA
TES
TM
Call FPX today
Call FPX today
to fi nd a local
to fi nd a local
battery dealer.
battery dealer.
<WARNING> A brand-new battery may have a low electrolyte level. Charge the battery first, and then add water if
needed. Adding water to a battery before charging may result in overflow of the electrolyte. J&J recommends topping off
the batteries once a week; with the J&J fill kit working properly, you cannot overfill the cells.
WHAT IS THE PROPER ELECTROLYTE LEVEL? (IF YOU ARE USING J&J FILL KIT, THE FLOAT VALVES WILL SHUT OFF
AUTOMATICALLY AT THE PROPER LEVEL)
Liquid levels should be 1/8 inch below the bottom of the vent well (the plastic tube that extends into the battery). The
electrolyte level should not drop below the top of the plates.
DO YOU EVER ADD ACID TO A BATTERY?
Under normal operating conditions, you never need to add acid. Only distilled, deionized, or approved water should
be added to achieve the recommended levels mentioned above. When a battery is shipped in a dry state, or accidental
spillage occurs, electrolyte should be added to the battery. Once filled, a battery should only need periodic water addition.
1-80-0003
2-60-0102
30 Amp Master Charger by FPX
2-70-A0009
2-70-A0022
2-70-A0018
Have the old style SB-50 connectors and need to match
them up to SB-120 connectors. We've got the solution.
This SB-50 to 120 plug adapter will do the trick.
2-70-0211
This combination strain relief and plug end
protector has an easy to grab hand hold for
connecting and disconnecting SB-120 charger
plugs from your bumperboats. No more broken
plug ends from charger leads being dropped on
the ground.
WE CARRY ALL YOUR BATTERY AND ELECTRICAL
NEEDS.
2-70-0073-120
2-70-0149
