0-10
Below are explanations of service listed in the monthly maintenance charts on previous page.
Explanations of monthly maintenance shall include, but are not limited to the following:
1. SB-120 PLUG(S):
Make sure that the plug is lubed with dielectric grease. Inspect the plug for deep grooving or signs of arcing.
2. MOTOR: Remove hood and check connections. Spray motor and wiring with corrosion block (J&J #99101).
3. BATTERIES: Check for corrosion, and spray terminals with battery protectant (J&J #99101). Fill batteries with distilled
water weekly, or as needed. Make sure compartment is ventilated.
‹ DANGER › : ***READ BATTERY SAFETY PRECAUTIONS BEFORE HANDLING BATTERIES***
4. PIVOT: Turn motor and check for smooth operation. If motor doesn’t turn easily, visually inspect pivot and grease if
necessary. Electric motor can turn 270°. Motor stops must be in place and in working order.
5. MOTOR /CHARGER POWER CABLES: Disconnect and grease terminals. Look for signs of wear (Replace as need-
ed).
6. SUMP PUMP: Clean strainer as needed. Check pump operation. If pump is not cycled periodically, check all wiring
connections. Repair or replace pump as needed.
7. PROPELLER GUARD: Inspect for damage or foreign materials. Replace if damaged.
‹ SAFETY ITEM › ***WARNING: DO NOT OPERATE IF PROPELLER GUARD IS DAMAGED OR MISSING***
8. HULL: Keep clean and wax every 200 hours or every 2 months. Use a UV protectant weekly to reduce color fading
(J&J part # 3-60-0034).
9. GENERAL WIRES & CONNECTIONS: Check all wires and connections for damage and corrosion. Clean or replace
as needed.
10. ANODE: Clean monthly. For year-round parks, replace anode every 6 months. For seasonal parks, replace anode
at end of the season.
11. SQUIRTER: Replace filter if necessary. Check integrity of hose, mount and pump. Check pump inlet for obstruc-
tions. Replace as needed.
12. TUBE: Clean with mild detergent. Check condition of tube daily. Check tube pressure weekly using low pressure
gauge (J&J #3-96-0024) and set pressure to 2-3 PSI.
NOTE: ALL NECESSARY REPAIRS NEED TO BE DONE BEFORE BOAT IS OPERATED. USE J&J AMUSEMENTS
OR EQUIVALENT REPLACEMENT PARTS. INSPECTIONS SHOULD BE DONE BY TRAINED AND QUALIFIED
PERSONNEL.
MONTHLY SERVICE SCHEDULE (Electric)
