40
User Manual
JABLOTRON 100
+
2.2.6.2. USER KEYPAD AUTHORIZATION
It is possible to activate a PG output just by user authorization (entering a code or using an RIFD
tag). The PG output must be confi gured to activate from a designated keypad.
2.2.6.3. FROM THE MENU OF THE KEYPAD WITH AN LCD DISPLAY
After user authorization the programmable outputs can be controlled from the menu of the keypad
with an LCD display. The user has access to programmable outputs depending on the user’s
permissions.
Control from the keypad menu:
:: Authorization by a valid code or an RFID chip.
:: Enter the menu by pressing ENTER.
:: PG Control
→
ENTER.
:: Select the desired PG group using arrows (1–32), (33–64), (65–96), (97–128)
→
ENTER.
:: Select the desired PG using arrows
→
ENTER.
:: Pressing ENTER repeatedly will change the PG statuses (active PG is shown by a PG
number in a rectangle fi lled with black colour.
:: Press ESC to exit the menu.
2.2.6.4. REMOTE CONTROL
By pressing an assigned button of a remote control. Bi-directional remote controls confi rm
activation of PG outputs with an LED indicator.
2.2.6.5. MyJABLOTRON SMARTPHONE APP
By tapping on ON/OFF in the Automation (PG) tab.
2.2.6.6. MyJABLOTRON WEB INTERFACE
By clicking on ON/OFF in the Automation (PG) tab.
2.2.6.7. DIALLING-IN
Each telephone number stored in the system (one user can have one telephone number)
can control one PG just by dialling-in (i.e. without establishing a call). Dialling-in consists
of dialling the phone number of the SIM card used in the security system and hanging up
before the system answers the call. By default, the system will answer the call after the
third ring (approximately 15 seconds).
2.2.6.8. SMS MESSAGE
Sending an SMS can switch on/off a particular PG. Authorization is/is not demanded
based on the system configuration.
Example
: CODE_CONFIGURED TEXT
Summary of Contents for 100+
Page 2: ...JABLOTRON 100...
Page 25: ...SCAN ME...
